CF series
CF02 Pellet Deduster
0–200 kg/h
Compact deduster for low-throughput lines. Ideal for PET flake and pellet purification.
View details →Home / Products
CF series pellet dedusters
Three families cover 0 to 150,000 kg/h. All use a static-neutralizing field and counterflow air cleaning.
CF series
CF05 Pellet Deduster
0–500 kg/h
Two-stage louvered cleaning for pellets, in a compact side-port design.
View details →
CF series
CF15–CF1500 Pellet Deduster
500–150,000 kg/h
Modular mid-large series in ten sizes, with smart control. For compounders, recyclers and resin plants.
View details →Find your model
Enter your required throughput to see which CF models fit.
Compare
| Model | Capacity (kg/h) | Dust after cleaning | Best for |
|---|---|---|---|
| CF02 | 0 – 200 | ≤50 ppm* | Low-throughput lines, PET flake and pellets |
| CF05 | 0 – 500 | ≤50 ppm* | Small to medium pellet lines |
| CF15–CF1500 | 500 – 150,000 | ≤50 ppm* | Compounding, recycling, resin and chemical plants |
*Typical result, tested to ASTM D7486; varies by material and operating conditions.
Selection FAQ
How is capacity defined?
The capacity ranges are nominal. The final size depends on the material, its bulk density and the dust level. Send us your data and we confirm the model.
What dust level can I expect?
Typically ≤50 ppm, measured per ASTM D7486. The actual result varies with material and operating conditions — we can test your sample first.
Closed loop or open loop?
See the comparison on the Systems page.
Send us your material — we'll recommend the right model
Tell us the material, throughput and bulk density. We reply with a model recommendation and a suggested system layout.